Step down VTC90, VTC140, VTC180, VTC240, VTC300 and VTC600 models from handle up to 100 VDC input, stepping down to 12 to 48VDC with power ranges 90 to 600 watts . Step up VTC305 and VTC605 models stabilize a 12V system, or step 12VDC up to 24 or 32VDC with power ranges of 300 to 600 watts. BuckBoost models for 18 to 30VDC input to 24VDC output are available by request.
Common Negative or Fully Isolated DC to DC models to convert or regulate DC voltages from 12 to 400 volts IN to DC voltages from 12 to 72 (rail) volts OUT at power levels from 100 to 1500 watts. Models are available to step-up, step-down, stabilize or isolate DC power over a range of 12 to 360 volts. No matter which unit you need, these easy-to-install Voltage Converters will give you many years of reliable service.
Analytic Systems’ modern DC/DC Voltage Converters use efficient filtering, allowing for ultra-quiet operation. In addition, our converters are:
Made from marine-grade aluminium extrusions or heavy-gauge aluminium sheet metal
Powder-coated or anodized, and use stainless fittings throughout
Fitted with robust circuit boards using expensive heavy-gauge copper conductors, designed by Analytic Systems’ engineers and assembled in our plant
Analytic Systems manufactures two different kinds of DC-DC Voltage Converters.
The first is Common Negative, where the input and the output share the same ground. These do not typically use a transformer and are less expensive to build. Models are available to step-down (Buck), step up (Boost), or a combination of step down and step up (Buck-Boost).
The second is Isolated, where a high frequency transformer is used to provide electrical isolation between input and output. These are typically used where there are different grounds for the input and output voltages, or if there is a large difference between the input voltage and output voltage.