GSP-810 Spectrum Analyzer

Frequency Range 150 kHz to 1 GHz

RBW 3 kHz, 30 kHz, 220 kHz, 4 MHz

Reference Level Range -30 dBm to +20 dBm

Low Noise Floor Performance -95dBm @ 30 kHz, -100 dBm typical; over -150 dBm/Hz typical @ 220kHz and 4 MHz RBW

Spurious Noise < -60 dB

Two Markers for Absolute and Relative Measurement

Max Hold, Average (2 to 32 traces), Freeze, Peak Search, Marker to Center

9 Save/Recal Memories

FM/AM Demodulator with Internal Speaker

RS-232 Interface and PC Display Software

Optional Internal 2 GHz Power Meter and 1 GHz Tracking Generator

Great for Hobbyist and Educational Use

 

FREQUENCY
Frequency Range	150 kHz to 1000 MHz
Frequency Resolution	1 kHz C.F. entry, 40 Hz sweep resolution at 2 kHz/DIV
Frequency Display	6 1/2 digit setting
Frequency Control	Digital phase locked
Frequency Stability	±2 ppm/year aging, ±10ppm, 0 to 50°C
Frequency Spans	Zero, 2 kHz to 100 MHz/DIV, in a 1-2-5 sequence
BANDWIDTH
Resolution Bandwidths	3 kHz, 30 kHz, 220 kHz, 4 MHz
Resolution BW Accuracy	15%
Video Bandwidth	1.6 kHz / 90 kHz coupled with RBW
AMPLITUDE
Reference Level Range	-30 dBm to +20 dBm
Reference Level Accuracy	±1dB at 80 MHz
Input Level Range	-100 dBm to +20 dBm
Noise Floor	-95 dBm @ 30 kHz RBW, -100 dBm typical -75 dBm:150 kHz to10 MHz
Amplitude Display Range	75dB
Amplitude Accuracy	±1.5 dB typical @ 0 dBm, 80 MHz
Amplitude Level Linearity	±1.5 dB over 70dB
Ref. Level Freq. Flatness	±1.5 dB over 100 MHz, ±2.5dB typical over entire band ±3 dB: 150 kHz to 10 MHz
Harmonic Spur Response	<-40 dBc, RF input < selected reference
Non-Harmonic Spur Response	<-60 dBc typical down from reference level, average, 5 MHz/div
Intermodulation (3rd)	<-70 dBc, @ -40 dBm input, 2 tones, 2 MHz apart <-45dBc:150 kHz to 10 MHz
Phase Noise	-77 dBc/Hz at 1 GHz, 30 kHz offset
INPUT
Input Overload Protection	+30 dBm continuous, ±25 VDC
Impedance	50 ohm nominal
Return Loss	<16 dBRL (VSWR < 1.35)
Input Attenuation	50 dB to 0 dB in 10 dB steps coupled to reference level
Connector	Type N female
MARKER
Number of Markers	2
Marker Resolution	0.1 dB, 1 kHz
Marker Mode	Absolute, Relative, PK to Marker, Marker to Center
Marker Accuracy	0.1 dB ± amplitude accuracy
FUNCTIONS
Memory	9 memories of save/recall
Trace	Max. Hold, Average (2 to 32 traces), Freeze (Hold)
Setup	Access parameters
FM/AM DEMODULATOR
WB FM	120 kHz deviation
MB FM	75 kHz deviation
NB FM	30 kHz deviation
AM Outputs	Internal speaker, 3.5 mm stereo jack, wired for mono operation
GENERAL
Power Source	100/120/220/230 VAC ±10%, 50/60 Hz
Accessory	Operation manual, Power cord
Dimensions and Weight	310 (W) x 150 (H) x 455 (D) mm, approx. 8.5 kg 12.2" W x 5.9" H x 17.9" D, approx. 18.7 lbs.
OPTIONS
TRACKING GENERATOR OPTION
Frequency Range	10 MHz to 1000 MHz
Amplitude Range	0 to -50 dBm
Amplitude Resolution	1dB
Amplitude Accuracy	±1 dB@ 0 dBm, 80 MHz
Attenuation Accuracy	±1 dB@ 50 MHz
Amplitude Flatness	±1 dB@ 10 MHz/DIV, ±1.5 dB @ 0dB, entire band
Harmonics	<-30 dBc
Reverse Power	<+30 dBm
Impedance	50 ohm nominal
Return Loss	<10 dBRL (VSWR<2)
Connector	Type N female
POWER METER OPTION
Frequency Range	10 MHz to 2 GHz, usable to 2.7 GHz
Power Level Range	-20 dBm to +23 dBm, usable to +30 dBm
Power Level Overload	+40 dBm<10% duty cycle, <10mS duration
Return Loss	<1:1.35 VSWR into 50 ohms, <1:1.25 typical
Readout Resolution	0.2 mW, 100 mW scale, 2 µW, 1 mW scale; 0.1 dB, Log scale
Accuracy	±(10% rdg ±1digit)
Readout	mW or dBm