GAG-810 Audio Generator

10 Hz to 1 MHz

Sine Distortion as low as 0.02%

600 Ohm Output Impedance

6-Step Output Attenuator

SINE WAVE
Frequency Range	10 Hz to 1 MHz, 5 ranges
Frequency Indicator	Dial Scale
Frequency Accuracy	±(3% + 1Hz)
Output Voltage	5 Vrms (600 Ohm load)
Frequency Response	10 Hz to 1 MHz ±0.5dB (600 Ohm load, reference 1 kHz)
Distortion Factor	500 Hz to 20 kHz, 0.02% or less 100 Hz to 100 kHz, 0.05% or less (x 10 range for 100 Hz, x 1 k range for 100 kHz) 50 Hz to 200 kHz, 0.3% or less 20 Hz to 500 kHz, 0.5% or less 10 Hz to 1 MHz, 1.5% or less
SQUARE WAVE
Output Voltage	10Vp-p or more
Overshoot	2% or less (at 1 kHz, max output)
Sag	5% or less (at 50 Hz)
Rise & Fall Time	Less than 200 nS
Duty Ratio	50% ±5%
EXTERNAL SYNCHRONIZATION
Synchronizing Range	±5% / Vrms
Max. Allowable Input	15V (DC + AC peak)
Input Impedance	150 kOhms
OUTPUT
Output Impedance	600 Ohms ±10%
Output Attenuator	0, -10, -20, -30, -40, -50dB 6 ranges (accuracy ±1dB at 600 Ohm load)
POWER SOURCE	AC 100/120/220/240V ±10%, 50/60 Hz
ACCESSORIES	Power cord, instruction manual, bananna-to-alligator test leads
DIMENSIONS & WEIGHT	132(W) x 211(H) x 297(D) mm, Approx. 2.5 kg

GFG-8020H Function Generator

Frequency Range: 0.2 Hz to 2 MHz

Coarse and Fine Tuning

Sine, Triangle, Square, TTL pulse and CMOS Output

Built-in 4 Digit Counter (internal only)

Large 0.5" LED Display

Variable DC Offset Control

Output Overload Protection

GFG-8210 Function Generator

Frequency Range: 0.1 Hz to 10 MHz

Sine, Triangle, Square, Ramp, TTL and CMOS Output

Coarse and Fine Frequency Control

External Voltage Controlled Frequency (VCF) Function

Duty Cycle Control with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20 dB x2) and Variable Attenuator

Built-in 6 Digit Counter with INT/EXT Function up to 150 MHz

LIN/LOG Sweep Mode

Sweep Output

GFG-8215A, GFG-8216A Function Generators

Frequency Range 0.3 Hz to 3 MHz

Sine, Triangle, Square, Ramp, TTL and CMOS Output

External Voltage Controlled Frequency (VCF) Function

Duty Cycle Controlled with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20 dB x2) and Variable Attenuator

Built-in 6-Digit 150 MHz Counter with INT./EXT. Function (GFG-8216A)

GFG-8217A, GFG-8219A Function Generators

Frequency Range 0.3 Hz to 3 MHz

Sine, Triangle, Square, Ramp, TTL and CMOS Output

External Voltage Controlled Frequency (VCF) Function

Duty Cycle Controlled with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20 dB x2) and Variable Attenuator

Built-in 150 MHz, 6 Digit Counter with INT./EXT. Function

INT/EXT AM/FM Modulation (GFG-8219A)

LIN/LOG Sweep Mode

GCV Output for Synchronization

GFG-8250A, GFG-8255A Function Generators

Frequency Range 0.5 Hz to 5 MHz

Sine, Triangle, Square, Ramp, TTL and CMOS Output

External Voltage Controlled Frequency (VCF) Function

Duty Cycle Controlled with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20 dB x2) and Variable Attenuator

Built-in 150 MHz, 6 Digit Counter with INT./EXT. Function

INT/EXT AM/FM Modulation (GFG-8255A)

LIN/LOG Sweep Mode (GFG-8255A)

GCV Output for Synchronization (GFG-8255A)