Lu-La-Usb
PC Based Logic Analyzer
The Lu-La-Usb is a small, but very capable PC Based Logic Analyzer. It is able to capture at 200MHz on its 16 Channels simultaniously. The software is mature and allows easy and intuitive interfacing to the instrument. The Lu-La-Usb interfaces to the PC via the USB port.
Key features
- 200 MHz sampling rate
- 16 Channels
- 1Meg Samples/Channel data buffer
- Flexible trigger options
- External clock input
- Extended capture time function
- Variable input threshold
- Variable pre-/post trigger buffer sizes
- Digital logger capabilities
- User-friendly software
- Runs on Windows 98/ME/2000/XP
- Plugs to the PC USB port
- Small size
- CE compliant
- Affordable
Lu-La-Usb PC Based Logic Analyzer short description
Advanced capabilities - easy to use
The comprehensive software provides a friendly and easily manageable environment for the wide spectrum of features. You can start meaningful measurements almost immediately after installing the software for the first time. Setting a trigger condition, capturing and navigating through the data, is a pleasure. The data may be viewed, saved and printed in various useful formats. If the Unit Under Test (UUT) is controlled by a PC, you do not require a second PC to run the logic analyzer software. Simply run your Lu-La-Usb and UUT software in different windows.
Flexible trigger options
A trigger may be set to occur on a rising edge, falling edge, or change-of-state on any channel. It may also be set for a level (pattern) condition by specifying a "1", "0" or "X" (don't care) condition on all channels. Combinations such as Edge OR Pattern, Edge AND Pattern, Edge THEN Pattern, Pattern THEN Edge, etc, may be set. A pattern duration may be specified. Triggering may then be set to occur should the pattern be shorter (glitch capture) or longer than the set duration.
During unconditionally continuous capture the screen updates at regular intervals. Continuous capture may be combined with a trigger condition. In this case the screen will update only when the condition is met. This is very useful for viewing continuously changing data, which cannot be viewed with simple regular screen updates: e.g. data on a serial line. By setting a condition you can view continuous screen updates, with the data nicely placed in the middle of the screen, where you can watch the data bits flipping.
Capability at low cost
Now a high-performance Logic Analyzer is within reach of every electronics professional and enthusiast. You can leave that expensive big company analyzer in the store… the Lu-La-Usb will match the job.
The standard package consists of:
Lu-La-Usb main unit
USB cable
16 x Test probes with ground leads
User's manual
Software
Logic-3p
PC Based Logic Analyzer
The Logic-3p is a sophisticated PC based Logic Analyzer, capable of capturing data at 200 MHz on its 16 channels, yet it is small enough to fit into your shirt pocket. It plugs to the PC parallel port or USB port (via included adaptor).
Key features
- 200 MHz sampling rate
- 16 Channels
- 128K Samples/Channel data buffer
- Flexible trigger options
- External clock input
- Extended capture time function
- Variable input threshold
- Variable pre-/post trigger buffer sizes
- Digital logger capabilities
- Plugs to the PC parrallel port
- Plugs to the PC USB port via a USB adaptor, now included in the package.
- Small size
- Runs under Windows 95/98/ME/NT/2000/XP
- CE compliant
- Affordable
Logic-3p PC Based Logic Analyzer short description
A high-performance vehicle - easy to drive
The comprehensive software provides a friendly and easily manageable environment for the wide spectrum of features. You can start meaningful measurements almost immediately after installing the software for the first time. Setting a trigger condition, capturing and navigating through the data, is a pleasure. The data may be viewed, saved and printed in various useful formats. If the Unit Under Test (UUT) is controlled by a PC, you do not require a second PC to run the logic analyzer software. Simply run your Logic-3p and UUT software in different windows.
Flexible trigger options
A trigger may be set to occur on a rising edge, falling edge, or change of state on any channel. It may also be set for a level (pattern) condition by specifying a "1", "0" or "X" (don't care) condition on all channels. Combinations such as Edge OR Pattern, Edge AND Pattern, Edge THEN Pattern, Pattern THEN Edge, etc, may be set. A pattern duration may be specified. Triggering may then be set to occur should the pattern be shorter (glitch capture) or longer than the set duration.
During unconditionally continuous capture the screen updates at regular intervals. Continuous capture may be combined with a trigger condition. In this case the screen will update only when the condition is met. This is very useful for viewing continuously changing data, which cannot be viewed with simple regular screen updates: e.g. data on a serial line. By setting a condition you can view continuous screen updates, with the data nicely placed in the middle of the screen, where you can watch the data bits flipping.
Capability at low cost
Now a high-performance Logic Analyzer is within reach of every electronics professional and enthusiast. You can leave that expensive big company analyzer in the store… the Logic-3p will match the job.
The standard package consists of:
Logic-3p unit + cable
5V Power supply
16 x Test probes
1 x Ground probe
User's manual
